2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Ram 98 5.2, Start fine when cold, die and back fire when hot

Thread Tools
 
Search this Thread
 
Old Feb 23, 2009 | 11:42 PM
  #1  
AlScrap's Avatar
AlScrap
Thread Starter
|
Registered User
Joined: Feb 2009
Posts: 2
Likes: 0
Default Ram 98 5.2, Start fine when cold, die and back fire when hot

Hi everyone.

I have a problem with my 98' dodge ram, 5.2 automatic, 100 000mile.

When I start, he run fine during 10-15 minuts, I can rev it to 5000rpm without problem. After some time (semi hot-hot) truck miss, don't rev and do a lot a back fire into the exhaust, smoke black like a damn good cummin's.

I do some search here and I read about choke sticking, but I don't think my 98 have a choke.

I try-check:

-All new tune-up
-computer
-crank sensor
-coolant sensor give me good number
-timing mark - timing chain


If you have any idea, thanks guy, sorry for english quality, habitually I write french.

AL
 
Reply
Old Feb 25, 2009 | 05:48 PM
  #2  
AlScrap's Avatar
AlScrap
Thread Starter
|
Registered User
Joined: Feb 2009
Posts: 2
Likes: 0
Default

No one

AL
 
Reply
Old Feb 25, 2009 | 05:57 PM
  #3  
zman17's Avatar
zman17
Retired Moderator - RIP
Joined: May 2008
Posts: 18,729
Likes: 17
From: NH
Default

MAP sensor maybe, or IAC. Take the TB off, remove all the sensors and clean it , and the sensors. Might as well try that before you start throwing money at it. Have you checked for codes? Is the CEL on or flashing when this happens?
 
Reply
Old Feb 25, 2009 | 06:17 PM
  #4  
ophidia's Avatar
ophidia
Captain
Joined: Sep 2008
Posts: 540
Likes: 0
From: Fargo, ND
Default

Your writing sounds all Cajuny-- awesome

Other than that-- what Zman said.
 
Reply
Old Feb 25, 2009 | 06:27 PM
  #5  
zman17's Avatar
zman17
Retired Moderator - RIP
Joined: May 2008
Posts: 18,729
Likes: 17
From: NH
Default

BTW, welcome to DF. Reason I ask about the CEL is because it could be the pre cat O2. Could be bad even if no CEL. Any chance you know if it has ever been replaced? And of course the broken record about the plenum gasket and having the cat checked.
 
Reply




All times are GMT -4. The time now is 05:44 PM.