genosgarage.com, it came with a gasket filter and all the fixins.

 

Yo what part number is that? I cant find it.

 

http://www.genosgarage.com/prodinfo....=MH-727DD-9803

 

http://www.maghytec.com/dodge727-doubledeep.aspx

they're a little cheaper than Geno's

 

ok so question will this fit under the stock skid plate I do go off road to I dont want it to be let in the field like a few other parts.

 

Wow, what a detailed write-up aim, very impressive. If I ever grow the kahunas to dissect my tranny and do something along these lines, I should be able to perform most of it from this write-up. Nice job!


Oh yeah, so hows she shifting now?

 

I would'nt even get the MAG-Hytec then. Get a PML pan.
http://www.genosgarage.com/prodinfo.asp?number=PML9393

 

that pan wont fit my truck!

 

nice write up squirrel. that'll be a nice addition to the diy. the pictures add so much.

and damn that's a deep pan - i cringe at the thought of the $dollars required to fill it up.
edit. for you guys looking at deep pans, be careful and don't mix up the mag-hytec 727-D and the 727-DD. the D is a little oversize and costs about $225. the DD is huge and costs about $270. watch out for some of the others that claim to be oversize. they are oversize compared to 518/727, but not deeper than the 46re, which has extra depth for the solenoids. somewhere i read that the summit pan is not even deep enough to replace the stock 46re without grinding fins out of the inside.

and - the major question is - how's the transmission doing ? shifting ok, feeling good ?

 

Ok so I dont want the dd.