Which Wheel??
#31
These are the specs on the Procomp 6001 rim that I want:
17x9, 5 on 5.5 Bolt Pattern
* Backspace = 4.75 in.
* Max Load = 2200lbs
* Finish = Chrome
* Hub Centric = No
* Offset = -6mm
Does anybody know if these will cause my tires to stick out more compared to my 17x8 offroad edition wheels now?
17x9, 5 on 5.5 Bolt Pattern
* Backspace = 4.75 in.
* Max Load = 2200lbs
* Finish = Chrome
* Hub Centric = No
* Offset = -6mm
Does anybody know if these will cause my tires to stick out more compared to my 17x8 offroad edition wheels now?
#32
They should stick out some more than they do now. The lower the backspacing the further it sticks out the side.
BTW you either want hub centric wheels or to make sure you get the rings to make them fit although, I've heard bad things about the hub centric rings. I think that's about the only option as most aftermarket wheels aren't hub centric.
BTW you either want hub centric wheels or to make sure you get the rings to make them fit although, I've heard bad things about the hub centric rings. I think that's about the only option as most aftermarket wheels aren't hub centric.
#33
#34
This isnt working quite the way I wanted it to. I guess its because of the differences in the resolutions. Here is what I have so far:
MOTOMETALONTRUCKMO951.jpg?t=1237580000
NextWheelChoice.jpg?t=1237580026
MOTOMETALONTRUCKMO951.jpg?t=1237580000
NextWheelChoice.jpg?t=1237580026
#35