2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Help!!! 5.9L injector problem

Old Mar 3, 2005 | 10:14 AM
  #1  
darin1's Avatar
darin1
Thread Starter
Joined: Mar 2005
Posts: 15
Likes: 0
From:
Default Help!!! 5.9L injector problem

Ok let's start with the obvious......The engine is running like crap!!!! (2001 2500 4x4 5.9L)
Put the code reader on.....It's telling me that the 5 and 7 injector circuit has issues.
so... I swapped the 5 and 7 injector with 1 and 3 , the problem did not follow!!!!!
So... anyone have any ideas short of changing the brain.
 
Reply
Old Mar 12, 2005 | 07:39 AM
  #2  
useittillitbreaks's Avatar
useittillitbreaks
Joined: Mar 2005
Posts: 7
Likes: 0
Default RE: Help!!! 5.9L injector problem

check 5 and 7 wiring for problems. you know that the injectors are good with the swap.
 
Reply
Old Mar 13, 2005 | 01:17 AM
  #3  
darin1's Avatar
darin1
Thread Starter
Joined: Mar 2005
Posts: 15
Likes: 0
From:
Default RE: Help!!! 5.9L injector problem

I rang the wires out and they were good, at this point I thought the PCM was bad so I droped the truck off at the Dodge dealer, that was Monday3/7 today is saturday 3/12 and my truck is still there.they pulled the distrbutor and said the gear was twisted, they fixed that and it didn't help,so they put in a new PCM and that didn't Help it's still getting the same codes 205&207 and it's still running like crap.

I think my only hope for help is the people of Dodge Forum !!!!!!!!!!!!!!!!!!!!!!!!!!!!!


PS
I miss my truck
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 01:50 AM.