2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

The DOGG and I take our first towing trip

Old Mar 24, 2009 | 12:57 AM
  #11  
BlueBeast2's Avatar
BlueBeast2
Champion
20 Year Member
Photogenic
Photoriffic
Shutterbug
Joined: Jul 2005
Posts: 2,966
Likes: 3
From: Greeneville, TN
Default

I took a pic of mine back with I hit like 100,069. Yes I'm young and thought the 69 was funny. I bought the truck with like 52,000 on it. I put a lot of miles on that sucker. Wish I would have looked how many were on it before I tore it all apart
 
Reply
Old Mar 24, 2009 | 10:23 AM
  #12  
Rex-TheDOGG's Avatar
Rex-TheDOGG
Thread Starter
|
Captain
Joined: Jul 2008
Posts: 678
Likes: 1
From: Houston, TX
Default

Can you hook up the battery and turn the key on?
 
Reply
Old Mar 24, 2009 | 11:25 AM
  #13  
BlueBeast2's Avatar
BlueBeast2
Champion
20 Year Member
Photogenic
Photoriffic
Shutterbug
Joined: Jul 2005
Posts: 2,966
Likes: 3
From: Greeneville, TN
Default

Originally Posted by Rex-TheDOGG
Can you hook up the battery and turn the key on?
Could does it matter that the wire harness is out of the truck.
 
Reply
Old Mar 24, 2009 | 11:35 AM
  #14  
Rex-TheDOGG's Avatar
Rex-TheDOGG
Thread Starter
|
Captain
Joined: Jul 2008
Posts: 678
Likes: 1
From: Houston, TX
Default

Originally Posted by BlueBeast2
Could does it matter that the wire harness is out of the truck.
Why is the wiring harness out of the truck? I'm assuming that all you did was pull the engine. You should still have a ground connection and hot wire going to the PDC.
 
Reply
Old Mar 24, 2009 | 12:10 PM
  #15  
BlueBeast2's Avatar
BlueBeast2
Champion
20 Year Member
Photogenic
Photoriffic
Shutterbug
Joined: Jul 2005
Posts: 2,966
Likes: 3
From: Greeneville, TN
Default

I pulled it to replace the inj connectors. All the locks were broke off and the one I had zip tied to stay on. The pcm is actually out at the moment too. I pulled it out to clean up the bay
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 10:57 AM.