Is any of this stuff a good deal?
#1
Is any of this stuff a good deal?
Local craigslist guy has the following parts for sale for a 94 to 99 ram v8
I’m selling a Dodge 5.9L Magnum motor from a ’95 ram and most of the upper engine parts.
All parts are new in the box except the engine and the Edelbrock manifold. The manifold is clean and none of the bolt holes are stripped. I’ll sell all of it as a group for $2250 or part it out.
2 Edelbrock RPM aluminum heads for ’93 and newer 5.2L and 5.9L magnum motor PN61779 $1250/pair
Cloyes True Roller Billet timing chain set PN 9-3503X9 $90
Comp Cams Roller cam .512”/.512” lift 210/220 degrees duration PN 20-604-9 $250
Mopar small block cam retainer/timing chain tensioner PN P5007709 $25
Sealed Power OEM roller lifters set of 16 PN HT2269 $100
Crane Blue Racer aluminum roller rockers PN WG3061 $125
Hughes Engines Fabricated aluminum valve covers w/ bolts PN HUG1810 $200
Edelbrock RPM Air Gap dual plane intake manifold PN 7577 $225
5.9L Magnum gas motor with all accessories (alternator, PS Pump, AC Compressor and brackets), complete top to bottom with wiring harness. Also have choice of throttle body. I’ve got a spare from a 2000 Ram. It is different from the ’95 TB. The engine is from a ’95 ram, unknown miles but turns easily. With an engine stand. Please bring lots of help to load this into your truck because I DON’T HAVE AN ENGINE HOIST!!!! $350
I’m selling a Dodge 5.9L Magnum motor from a ’95 ram and most of the upper engine parts.
All parts are new in the box except the engine and the Edelbrock manifold. The manifold is clean and none of the bolt holes are stripped. I’ll sell all of it as a group for $2250 or part it out.
2 Edelbrock RPM aluminum heads for ’93 and newer 5.2L and 5.9L magnum motor PN61779 $1250/pair
Cloyes True Roller Billet timing chain set PN 9-3503X9 $90
Comp Cams Roller cam .512”/.512” lift 210/220 degrees duration PN 20-604-9 $250
Mopar small block cam retainer/timing chain tensioner PN P5007709 $25
Sealed Power OEM roller lifters set of 16 PN HT2269 $100
Crane Blue Racer aluminum roller rockers PN WG3061 $125
Hughes Engines Fabricated aluminum valve covers w/ bolts PN HUG1810 $200
Edelbrock RPM Air Gap dual plane intake manifold PN 7577 $225
5.9L Magnum gas motor with all accessories (alternator, PS Pump, AC Compressor and brackets), complete top to bottom with wiring harness. Also have choice of throttle body. I’ve got a spare from a 2000 Ram. It is different from the ’95 TB. The engine is from a ’95 ram, unknown miles but turns easily. With an engine stand. Please bring lots of help to load this into your truck because I DON’T HAVE AN ENGINE HOIST!!!! $350