Installed a 180* t-stat.

Reply Subscribe

Thread Tools

Search this Thread

Apr 7, 2009 | 09:47 AM

#11

ophidia

Captain

Joined: Sep 2008

Posts: 540

Likes: 0

From: Fargo, ND

The threads on my fan bolt are standard righty-tighty lefty-loosey threads. I've had that sucker off 4 times in the past 3 months so I'm sure of that.

Apr 7, 2009 | 11:08 AM

#12

Laramie1997

Grand Champion

Joined: Sep 2008

Posts: 6,980

Likes: 5

From: Springfield MO

Quote:

Originally Posted by ophidia

The threads on my fan bolt are standard righty-tighty lefty-loosey threads. I've had that sucker off 4 times in the past 3 months so I'm sure of that.

That was the part i couldnt remember.
Thanks

Apr 7, 2009 | 11:26 AM

#13

steve05ram360

Hall Of Fame

Joined: Jan 2004

Posts: 12,946

Likes: 309

Quote:

Originally Posted by JackJ

They sell a 900cfm fan (I think, it might only be 750cfm) at auto zone for about $50 x2 =$100+trans cooler $58=$158 + temp controller $40=$200 and depending on where I get the radiator I have seen priced for about $176 to $226 it will add up to about $400.

I dont think I am gunna get the second fan though.

MCSS, you just gotta look around, you can always find cheaper parts. Also add in 0.75 for a fan overide switch.

you need more than 2x900cfm... look for dual 1250's or better IMO. Search the forum for fan threads and find out what is being used that works under heavy load. last thing you want is to tow your buddy's boat to the lake and have it overheat because of fans not pulling enough.

Reply Subscribe

Thread Tools

Search this Thread

Show Printable Version

Email this Page

Reply Share

First
Prev
2 / 2
Next
Last

Forum Jump