As you all know I'm rebuilding my engine. When all is done I'll have a bored 0.030 block, cam, rr's, hd heads, hughes air gap intake, fastman 52mm, SCT tune, and all the exhaust stuff I already have.

I have seen different discussion on what the stock injectors can handle. Will I need larger ones and if so what size should I get?

 

talk with you tuner first (is it hemifever?) Stock injectors are good for over 400hp. IF you need to increase, it shouldn't be more than the next size up.

 

Yes it will be hemifever. I haven't bought the sct yet. I need to send him a message asking some questions.

 

Go big or go home! How is that block? Is it on its way back from chain yet?

 

Where is chain?

 

Idk lol chian lol. Well I think I need to go to bed lol. Side note I had to pull my buddys FORD ranger off a pile of dirt today. I just got a strap 3 wide by 30 ft long got it for 60 buck. Made 10 bucks to pull him off the pile. I told him not to try to 4x4 in a 2x4.

 

Do you mean China?

 

yeah he did.


Heres what I dont get. Mustangs well 94-95 anyway came with 19's stock. They arn't really good for ****. You throw a H/C/I on one and your pushing it with 24's. That's only a 302. Ours are 360's and have close to the same stock and its good for 400? I find that crazy.

 

Yep thank you agin.

 

One thing you have to remember is our truck run with 48psi at the fuel rails, unlike ford that uses 39psi at the fuel rails (at least that's what my buddies 04 cobra runs). It does make a difference on what kind HP you can make.