2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

What engine do I have?

Old May 12, 2009 | 02:20 PM
  #1  
mhicks1017's Avatar
mhicks1017
Thread Starter
|
Registered User
Joined: Jan 2007
Posts: 16
Likes: 0
From:
Default What engine do I have?

I just traded my Dakota yesterday for a 1998 Ram. I ran the vin number, and it said my truck was built with a 5.9/360. What brings me to question this, is the sticker under the hood. The sticker under the hood says it is a 5.2. How I figure out what motor I acutally have?
 
Reply
Old May 12, 2009 | 02:26 PM
  #2  
MattBiz223's Avatar
MattBiz223
Professional
Joined: May 2009
Posts: 140
Likes: 0
From: IL
Default

i have a sticker on mine that says that too but i do have 5.9, there should be a little list on the top of the hood when you open it with your gear ratio and axle types and stuff compare that to the list in the manual if you dont have a manual look at the gear ratio if its 3.55 its a 5.9 i dont think the 5.2 comes in 3.55
 
Reply
Old May 12, 2009 | 02:29 PM
  #3  
Cereal Killer's Avatar
Cereal Killer
Champion
Joined: Feb 2007
Posts: 3,014
Likes: 5
From:
Default

Actually most 5.2s came with 3.55 gears as well...

Anyway your vin number is most likely correct, but you could contact dodge for a build sheet to be 100%
 
Reply
Old May 12, 2009 | 02:48 PM
  #4  
mhicks1017's Avatar
mhicks1017
Thread Starter
|
Registered User
Joined: Jan 2007
Posts: 16
Likes: 0
From:
Default

That is very interesting on the sticker... It does have the 3.55 ratio axles. I will contact dodge for that build sheet. Thanks for the help.
 
Reply
Old May 12, 2009 | 03:01 PM
  #5  
97black_ram's Avatar
97black_ram
Captain
Joined: Oct 2008
Posts: 526
Likes: 0
From: Ohio
Default

Originally Posted by MattBiz223
i have a sticker on mine that says that too but i do have 5.9, there should be a little list on the top of the hood when you open it with your gear ratio and axle types and stuff compare that to the list in the manual if you dont have a manual look at the gear ratio if its 3.55 its a 5.9 i dont think the 5.2 comes in 3.55
All these trucks have 3.55. Even the new 09 ram has 3.55 or option for 3.92 in the off-road package.

Not sure of a way to pin point a difference between the 5.2L and 5.9L by just looking at them.
 
Reply
Old May 12, 2009 | 03:04 PM
  #6  
MattBiz223's Avatar
MattBiz223
Professional
Joined: May 2009
Posts: 140
Likes: 0
From: IL
Default

some one said they had a lower gear ratio sorry thought that would be the difference but i have a 5.9L but the 5.2 sticker
 
Reply
Old May 12, 2009 | 03:08 PM
  #7  
99DRAM31887's Avatar
99DRAM31887
Veteran
Joined: Sep 2008
Posts: 336
Likes: 0
From: San Angelo,Texas
Default

its ok it happens but i have a 97 1500 4x4 now with the 360 and before i had a 99 1500 4x4 with the the 318 and they both had 3.55's i want some 4.10's : )
 
Reply
Old May 12, 2009 | 03:14 PM
  #8  
97black_ram's Avatar
97black_ram
Captain
Joined: Oct 2008
Posts: 526
Likes: 0
From: Ohio
Default

Originally Posted by 99DRAM31887
its ok it happens but i have a 97 1500 4x4 now with the 360 and before i had a 99 1500 4x4 with the the 318 and they both had 3.55's i want some 4.10's : )
I will second that. My Chevy has 4.10's and love it. Being my ram's 4wd it is expensive to change gears.
 
Reply
Old May 12, 2009 | 03:19 PM
  #9  
jasonw's Avatar
jasonw
Site Moderator
Joined: Jan 2008
Posts: 8,374
Likes: 28
From: Sioux Falls, SD
Default

Most Rams (not sure if it was SLT package and above or what) came with the option for 3.92 gears, most people just didn't get that option.

The only way to get 4.10s from the factory was the Off-Road package. And yep, the new Off-Roads only come with 3.92s.

Unless a previous owner dropped a different engine in there, the sticker on the underside of the hood should tell you what you have.
 
Reply
Old May 12, 2009 | 03:22 PM
  #10  
J415's Avatar
J415
Champion
Joined: Feb 2009
Posts: 3,416
Likes: 4
From: Bay Area, CA
Default

couldn't you tell the engine size by the amount of oil it take at an oil change? My 5.2 with the stock filter takes 5 quarts and it'll be at the half way mark on the dip stick. just a thought.
 
Reply

Thread Tools
Search this Thread

All times are GMT -4. The time now is 12:23 PM.