2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

reverse is binding

Thread Tools
 
Search this Thread
 
  #1  
Old 05-30-2009, 10:56 PM
james_tessier's Avatar
james_tessier
james_tessier is offline
Registered User
Thread Starter
Join Date: May 2009
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Question reverse is binding

I just bought a 1998 ram 5.2, with 20000kms 2 weeks ago. I re did all the body on it and it came out real nice. But the transmission is being weird, all forward gears are perfect, but reverse its like there is something holding me back, checked the brakes not that, im pretty sure its in the tranny, Changed the fluid and filter this morning it was dark but no deposits in the pan it was clean really, any ideas?
 
  #2  
Old 06-01-2009, 08:10 AM
james_tessier's Avatar
james_tessier
james_tessier is offline
Registered User
Thread Starter
Join Date: May 2009
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Default anyone

anyone ever hear of this?
 
  #3  
Old 06-01-2009, 12:50 PM
MonteC's Avatar
MonteC
MonteC is offline
Record Breaker
Join Date: Nov 2003
Location: North Charleston, SC
Posts: 1,256
Likes: 0
Received 2 Likes on 2 Posts
Default

You may have a cross leak into the forward clutch circuit when reverse is applied.
 
  #4  
Old 06-01-2009, 01:04 PM
james_tessier's Avatar
james_tessier
james_tessier is offline
Registered User
Thread Starter
Join Date: May 2009
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Default so?

so rebuild?. or drive it as it is? Reverse is very usable just tight.
 
  #5  
Old 06-01-2009, 02:15 PM
Gary-L's Avatar
Gary-L
Gary-L is offline
Legend
Join Date: May 2005
Posts: 8,648
Likes: 0
Received 5 Likes on 5 Posts
Default

Dumb question, but is the parking brake applied? Seriously.
 
  #6  
Old 06-01-2009, 02:47 PM
james_tessier's Avatar
james_tessier
james_tessier is offline
Registered User
Thread Starter
Join Date: May 2009
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Default no

no because I checked it haha, and 2 id feel it in forward as well.
 
  #7  
Old 06-01-2009, 03:15 PM
Gary-L's Avatar
Gary-L
Gary-L is offline
Legend
Join Date: May 2005
Posts: 8,648
Likes: 0
Received 5 Likes on 5 Posts
Default

Originally Posted by james_tessier
no because I checked it haha, and 2 id feel it in forward as well.
Not really. I've forgotten my parking brake was set and didn't figure it out until I tried to back. As I said, I wasn't trying to be a smart-***. Sometimes the little crap will kick you in the nards.
 
  #8  
Old 06-01-2009, 04:17 PM
james_tessier's Avatar
james_tessier
james_tessier is offline
Registered User
Thread Starter
Join Date: May 2009
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Default ok

alrite i will try it tonite see if it works.
 
  #9  
Old 06-01-2009, 07:05 PM
MonteC's Avatar
MonteC
MonteC is offline
Record Breaker
Join Date: Nov 2003
Location: North Charleston, SC
Posts: 1,256
Likes: 0
Received 2 Likes on 2 Posts
Default

Have you jacked the rear end up and confirmed that the wheels turn freely backwards? (turning both at the same time.)
 
  #10  
Old 06-03-2009, 08:24 AM
james_tessier's Avatar
james_tessier
james_tessier is offline
Registered User
Thread Starter
Join Date: May 2009
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Default tried jacking it up

I jacked up the rear last nite, it will turn in reverse for about 10secs then locks up, then, you need to gas it for them to move again.
 


Quick Reply: reverse is binding



All times are GMT -4. The time now is 03:35 AM.