2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Need help on 1500 4x4.

Old Aug 6, 2009 | 12:46 PM
  #1  
roughriderm05's Avatar
roughriderm05
Thread Starter
|
Registered User
Joined: Aug 2009
Posts: 1
Likes: 0
Exclamation Need help on 1500 4x4.

I was replacing the tranny when the vacuum hose that goes to the transfer case fell off. Since I didn't notice it I have no clue where the other end goes, the engine side. Im thinkin its important since thats the only thing not finished and when i put the truck in reverse it dies immediately. I believe its a 1998ish.
 
Reply
Old Aug 6, 2009 | 12:55 PM
  #2  
zman17's Avatar
zman17
Retired Moderator - RIP
Joined: May 2008
Posts: 18,729
Likes: 17
From: NH
Default

This will help you figuring out the vacuum for the tcase/ 4wd operation, which unfortunately for you , has absolutely nothing to do with the operation of the transmission.http://www.dodgeram.org/tech/repair/..._engagment.htm
 

Last edited by zman17; Aug 6, 2009 at 12:58 PM.
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 07:36 AM.