I bought a new 1994 Ram 2500 4x4 I'am going to change all four shocks, I have been sparying all bolts with penetrating oil, the left front shock where all the break lines are does anyone have any suggestion about getting that shock out of the area, any help would be appreciated.
haybail

 

Welcome to DF Haybail! I move this over to the 2nd Gen Ram Section for better advice for ya! Enjoy and Good LUCK!

 

after taking the nut off the shocks stud you need to take the three bolts off the shock tower and the shock will lift straight out through the engine compartment.