I want to install a remote start.... the truck is a 98 Ram 4x4 with no power anything like windows or doors etc
I just want to remote start it
The kit says the module wires on remote start says yellow goes to ignition, red wire goes to 12v(battery), orange goes to accessories( dont care) purple goes to the starter the green wire goes to the 5th relay and the red wire goes to 12v battery it has a fuse on that wire

If anyone knows the wiring schematic on a 98 ram where theses wires goes
I would love to get help..... it doesnt seem that hard
Thanks
Mike

 

Try this http://www.the12volt.com/ You will want to wire every thing you can including ACC the unit goes there before starting the engine on my unit.

 

^+1 on the above mentioned website. They have never steered me wrong.

 

Thanks for the infor but it only tells me hook it up to the Ignition Switch Harness which I know.... I need to know the colors wires it goes to?
Mike

Ok never mind i read it again
Thanks again