whats the horsepower stock
#21
well hey im kinda worried that my engine is about to need to be replaced plus i would love to have a better one in it seeing as i just rebuilt the tranny so i would have all new under the hood if i drop a new one in so what do yall think about this one...
http://www.rebuiltcrateengines.com/d...2l-p-2116.html
let me know if yall think its worth it, plus after i drop the new one in i was gona rebuild the old one and sell it to make some of the money back
http://www.rebuiltcrateengines.com/d...2l-p-2116.html
let me know if yall think its worth it, plus after i drop the new one in i was gona rebuild the old one and sell it to make some of the money back
#22
I'm with Laramie. The newer automatics put just as much down, if not more. However...
Our auto transmissions are not "geared" the best, so to speak, obviously, as anyone with a performance rebuilt transmission (or shift kit even) in one of these trucks will tell you. They shift much better with better performance if rebuilt really strongly and/or after a shift kit.
Before or after the rebuild/shift kit, a manual may still feel like its putting the horses to the ground better/faster, as you control the truck more than you do with an automatic.
Our auto transmissions are not "geared" the best, so to speak, obviously, as anyone with a performance rebuilt transmission (or shift kit even) in one of these trucks will tell you. They shift much better with better performance if rebuilt really strongly and/or after a shift kit.
Before or after the rebuild/shift kit, a manual may still feel like its putting the horses to the ground better/faster, as you control the truck more than you do with an automatic.
#23
well hey im kinda worried that my engine is about to need to be replaced plus i would love to have a better one in it seeing as i just rebuilt the tranny so i would have all new under the hood if i drop a new one in so what do yall think about this one...
http://www.rebuiltcrateengines.com/d...2l-p-2116.html
let me know if yall think its worth it, plus after i drop the new one in i was gona rebuild the old one and sell it to make some of the money back
http://www.rebuiltcrateengines.com/d...2l-p-2116.html
let me know if yall think its worth it, plus after i drop the new one in i was gona rebuild the old one and sell it to make some of the money back
plus,
for $100 more, I'd go for the 5.9 w/ 325HP.
Last edited by Mega-Hemi; 09-03-2009 at 10:55 AM.
#26
Just go with this than. http://www.rebuiltcrateengines.com/d...x4-p-2121.html
now youre talking.
unless you wanted to turn your dodge into a chevodge, then you could go with a 572 big block.....*drools all over the desk*
#27
ok well hers a question the reason i have been looking at getting a new engine is bc my oil pressure is tripping me out and i think the oil pump is going out and i figure i could always use more hp and if i have to rip the engine apart to do the oil pump i might as well rebuild it. so maybe yall can save me some money my oil pressure is perfect while driving i have about 1000 miles left till i hit 3000 miles on my oil change (so im guessing that its not bad oil) my oil is full in the pan but whenever i stop and the rpms go below 800 rpms when im idling my oil pressure goes to 0 and my check gauge light comes on but if i hold the rpms at 800 it goes back up or once i start driving it goes back up does anyone know what that means???
#29
ok well hers a question the reason i have been looking at getting a new engine is bc my oil pressure is tripping me out and i think the oil pump is going out and i figure i could always use more hp and if i have to rip the engine apart to do the oil pump i might as well rebuild it. so maybe yall can save me some money my oil pressure is perfect while driving i have about 1000 miles left till i hit 3000 miles on my oil change (so im guessing that its not bad oil) my oil is full in the pan but whenever i stop and the rpms go below 800 rpms when im idling my oil pressure goes to 0 and my check gauge light comes on but if i hold the rpms at 800 it goes back up or once i start driving it goes back up does anyone know what that means???
i had the same problem, its not the pump, its low oil level, when you stop the oil sloshes forward, and the pump sucks air, or little oil. then it goes right back up to normal. and you can replace a oil pump without tearing the whole motor down i believe. i think you can do it without taking the motor out as well.
#30
Oil Pump
I have a 98 and have taken the oil pan off while the motor was in the truck.. I have never had a problem with the oil sloshing and losing PSI. I do take mine off road.. It MAY be a bad sending unit or something else or you may be looking at a rebuild.. If a rebuild is in order, you heads are probably junk.. They all crack..