You might also want to download the FSM, it will help with tracing wires. https://dodgeforum.com/forum/2nd-gen...tmas-guys.html

The wires for that I belive are ran along the drivers side floor and up the B pillar and then over to the dome light and the third brake like. What happens a lot is the wires will get weathered by being under the drivers side carpet and and will short out. That is what I would check if you unplug your switch and they still are on.

I have a 2009 grand caravan that the brakes lights stay on, when the engine is on .this happened after I had to have a new key pod programed when the security wouldn't let me start the car;any ideas, I took it to dodge , they knew nothing