Need a front ABS sensor line (connects to the front wheel hub and runs up to a connector under the hood) for my 01 Ram2500. Have no idea which years or which makes are interchangeable for this part but I would assume any 4wheel ABS truck should have it. None of my local scrap yard have this part. Need ASAP is possible. PM or email me if you have it. Thanks!

 

You need to post this in the "want to buy" section of the DF. The moderators don't want these listing in this section. Just telling you from personal experience.

 

I also posted in there as well. Just figured I'd get more hits in this area, more owners of the part I'm lookin for look in here.

 

well i got the wires i cut off of my hubs when i replaced my hubs, they were for abs, and i dont have abs so i just cut the wires, i believe i have both wires actually.

i cut the wires about 1/2" above the sensor in the hub. so its still a fairly big chuck of wire.

ill go look in the garage here in a min for them, and if its what your looking for, then we can talk.

EDIT

I have 1 in hand, i still have to look for the other, i think its out in the bed of my truck.

Dont wory its covered, i have a hard top tonnau cover.

youlll just have to splice the wires together.

 

Just need one of them but need the whole thing. HAH, you went a cut up a pricey wire. just one bolt holds that on the hub. My rotor rubbed through mine and now it doesn't work right. I'd rather not splice it (I could prob do that with my wire) just lookin for a whole complete one. Thanks though.

Also if anyone has a junk yard near them that has this wire on one of the trucks, get it for and ill pay you back and for shipping as well. THANKS.

 

well i didnt want to pull the sensor out and leave an open hole in the assy. as i only have 2 wheel ABS anyways, so its no use to me.