2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Jumped a curb...Messed up Front End...

Thread Tools
 
Search this Thread
 
Old Nov 15, 2009 | 10:31 AM
  #11  
zman17's Avatar
zman17
Retired Moderator - RIP
Joined: May 2008
Posts: 18,729
Likes: 17
From: NH
Default

Check the intermediate shaft too, where it connects to gear box and the slip joint. If you don't find any bent tie rods or anything, I'd say the gear box is toast.
 
Reply
Old Nov 15, 2009 | 03:46 PM
  #12  
95RAM360's Avatar
95RAM360
Thread Starter
|
Grand Champion
Joined: Aug 2009
Posts: 5,971
Likes: 45
From: MAINE
Default

well i drove it to work this morning, and the steering wheel is at about 2 0clock now. And there wa no jumping at all....i think its because last night it was raining, and the 2 left turns that i took, (from accident to home) were sharp ones. today, i tried to make it jump since its dry out, and its not jumping anymore....

but did come to find i need wheel bearings

these front ends are weird....
 
Reply




All times are GMT -4. The time now is 07:52 AM.