2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Heating and A/C

Thread Tools
 
Search this Thread
 
Old Feb 14, 2010 | 03:46 PM
  #1  
truegent81's Avatar
truegent81
Thread Starter
|
Captain
Joined: Aug 2009
Posts: 569
Likes: 0
From: Wherever Uncle Sam Says
Default Heating and A/C

so i figured my a/c had a leak somewhere so i had a shop put some dye into the lines. sure enough, i have leaks in the evaporator and the condenser. the shop says $1900 to fix it . i know i'll get this fixed but i just need to buy the parts on my own and not get ripped off. any ideas? or will i have to buy them from the dealership? why does dodge have to be so stingy and weird about other businesses selling their parts. at auto zone they hardly carry anything that is a major part for dodge.

i guess while i'm at it, i'll get a new heater core because i've also noticed my passenger floorboard is a little moist.
 
Reply
Old Feb 14, 2010 | 10:33 PM
  #2  
elcheeko's Avatar
elcheeko
Amateur
Joined: Dec 2009
Posts: 44
Likes: 0
From: Texas
Default

good luck on tha heater core it took me a day and a half to do it
 
Reply
Old Feb 14, 2010 | 10:37 PM
  #3  
PurplDodge's Avatar
PurplDodge
Legend
Joined: Jan 2008
Posts: 8,321
Likes: 12
From: Indiana
Default

Originally Posted by truegent81
so i figured my a/c had a leak somewhere so i had a shop put some dye into the lines. sure enough, i have leaks in the evaporator and the condenser. the shop says $1900 to fix it . i know i'll get this fixed but i just need to buy the parts on my own and not get ripped off. any ideas? or will i have to buy them from the dealership? why does dodge have to be so stingy and weird about other businesses selling their parts. at auto zone they hardly carry anything that is a major part for dodge.

i guess while i'm at it, i'll get a new heater core because i've also noticed my passenger floorboard is a little moist.
I did this for under $400.

Read this thread, the whole thread. Good tid bits of info stuck in there:
https://dodgeforum.com/forum/2nd-gen...-the-dash.html
 
Reply




All times are GMT -4. The time now is 09:09 PM.