endisnear...i did think about that...but my 96 has fallen to the "saggy spring" illness and i was hoping for a kit with a set of springs in it...but inorder to accomplish what i would like to accomplish . I might have to buy my lift piece by piece...thanx for the link , that truck looks nice....oh yeah to answer your question it only spoke of the spindle lift of 3 1/2 inches

 

That 3" lift comes with new springs and upper arms. Made by Fabtech

 

yes thats what i was looking at ,i guess then i could add the spacers and make it four...thanx end...and by the way your screen name is in reference to what end ?

 

Yea thats what I plan on doing too. I have 1.5" spacers right now, and I wanna add that 3" lift by Fabtech.

And EndIsNear is in reference to the end of time. I don't know what everybody believes, but I'm a Christian and in my opinion, our time on earth is almost up. Just what I believe

 

My truck will have a 5" total when I'm done. Right now she's doing a nosedive because of the 3 inch rear blocks and only 2 inches in the front. I have 33's. With 5" inches you can stuff 35's under your truck but your articulation suffers. My future plans are to get a 3 inch body lift before
I put 35's on just to be safe.

 

well i was off today...and i decided to go by 4 wheel parts....I told the guy that i have a 96 2wd and i wanted a 4 inch lift kit...he told me only thing available was with fabtech and it came in a 3 1/2 lift not four. or i could opt to go with the 6 1/2 kit . and procomp only had a 2 inch kit...after 10 minutes and him putting 50 people on hold(glad i stopped by instead of calling....i would still be on hold) he gave me an estimate for 6.5 lift 35`s on and 18 inch rim runnin an all terrain tire....tell you what if you want im gonna give you guys the break down

fab fts3000-6 arm kit ram 1500 unit 557.90

fab fts3000-7 spindle ram 2wd 94 unit 528.99

fab fts3000-3 coil springs 3 ram150 unit 168.99

fab ftsbk4 block kit unit 46.99

fab fts7119 perf schock unit 47.99(each) xtnd amnt 95.98

fab fts7333 perf schock unit 47.99(each) xtnd amnt 95.98

pct 581235 35/12.5r18 unit 343.99(each) xtnd amnt 1375.96

pxa 6001-89585 18x9.5 5x5.5 4.5in unit 250.99 xtnd amnt 1003.96

pxa 21183 1/2 spline lug nut unit 25.99

suspension install labor 595.00

alignment labor total 127.50

mount and balance 102.00

lube cleaners hdw 20.00

all inclusive tire warr 149.99

3yr/36k parts & labor warr 295.00

total of ....5,678.05

well input please














Well endisnear ....I totally like your screen name.I also believe that. The earthquakes and so for its all coming to past...I also am a follower of Christ...thanx for that

 

i would just go with a smaller lift and a bodylift

 

Well I'm glad to have found another believer .

But $5 grand seems a little high bud... I mean, its probably right, because I haven't been searching for wheels and tires too. But $500 for installation?? Thats ridiculous. I think you could do it yourself if you really wanted. The onlything you would have to cut and weld is the bump stop mount. And if you can't weld, you could find somebody for a lot cheaper. I don't know. Just seems a little high...

 

I only posted that so everyone else can see the raping thats going on out there. i will be installing it myself. and yes i can weld and i have lincoln garage welder...i think its a 125 ,but its not in front of me so im not sure...so no install fee for me. and yes i will search for less expensive tire and wheel combo

 

hey dakota`s....i am looking 4 a specific look. i already have a chevy truck that i lowered. And i really want to go up in the air. and seeing i got the truck for less than 500. i c it as a win win,baby But thanx 4 your input bro. Im either leaning to the 6.5 lift or go about peicing it to gather ...like spinles from one company and the springs i need from another, and blocks ...really thats all i need and then to extend brake lines. then go to my local hydralic shop and get me some steel braided made up and im gold.....5g is way to much....heck i wanna spend my money on other things