Airbox question
Thread Starter
|
Professional
Joined: Feb 2010
Posts: 131
Likes: 0
From: Chicago
Airbox question
Hey guys this will be my last thread... i promise 
But i was going to take the airbox off to see if my plenum gasket was bad and i cannot for the life of me figure out how this thing comes off. If you need pics i can post some.
But i was going to take the airbox off to see if my plenum gasket was bad and i cannot for the life of me figure out how this thing comes off. If you need pics i can post some.
Banned
Joined: May 2006
Posts: 3,667
Likes: 1
From: Burnsville, mn - Pensacola, fl
should just be a flat head screw bolt on the neck of it, just losen it like you would if you were taking off a hose clamp. Then twist the ring and pull up and the whole thing will come off
Grand Champion
Joined: Aug 2009
Posts: 5,971
Likes: 45
From: MAINE
theres a little scew that comes up, and the air box has a rubber grommet that goes on it, they can sometimes be a pain to remove, once you've loosened the gea clamp around the bottom of the housing, take off the Rubber line going from the air box to valve cover, and also the piece that goes to the pass. fender, and pull it up, it will come off.
Banned
Joined: May 2006
Posts: 3,667
Likes: 1
From: Burnsville, mn - Pensacola, fl
He didn ask all that dammit he just asked how to take it off 
mr statistic
mr statistictheres a little scew that comes up, and the air box has a rubber grommet that goes on it, they can sometimes be a pain to remove, once you've loosened the gea clamp around the bottom of the housing, take off the Rubber line going from the air box to valve cover, and also the piece that goes to the pass. fender, and pull it up, it will come off.