I dug this up from the garage i forgot who's original post this was. I just printed it off years ago off here, maybe someone will know and give them credit for it, I know it's blurry, but thats a 30 amp relay in the middle NUMBERS from relay = 87 goes to both lights ,86 to ground, 85 to "ON" terminal on toggle switch , 30 to inline fuse to battery( 20 amp fuse). From "OFF" terminal from toggle to IGN or Batt power in fuse panel, i used my cigar fuse in my fuse panel. I used a SPST toggle (single pole single throw ) i know this is confusing or f'd up but maybe you can get the idea , i followed this exactly and has worked no problems for years/ thats a indicator light wiring option above the toggle pic,(black line) i didnt use it

 

Damn jr.

 

lmao, i know its not the greatest , but if you could see it clearly, its simple and to the point install. Do you remember who's this was back in 06 when steveram360 was here and silver was doing the air cleaner and indy was burning down his truck cussing at the fire dept and neon was well, we wont go there......................?

 

**** no.. viper maybe?

 

i heard the name but dont remember him just heard he was a dick all the time.

 

He's a dip****

 

ITS FIXED!!!

I guess the reverse light switch the tranny guy put in was bad to, so I grabbed a new one from advance and it works like a champ now.....I'm happier than a little boy with two weiners

 

Sweet! that's the only other thing i could think of to replace again. but if you could make out the pic, lol, it does work well for aux back up lights.

 

yeah that was my next step for the lights, but I figured for $11 i'd try another one before I got into wiring crap.....and low and behold it worked. THANKS GUYS!!

 

that's one happy chap !!