Need Some Help With a Cam
Thread Starter
|
Amateur
Joined: Feb 2010
Posts: 32
Likes: 0
From: Houston, Texas
Need Some Help With a Cam
im looking around for cams and i came across this one http://www.summitracing.com/parts/CCA-20-604-9/
if anyone could tell me where i could find springs and push rods that will support this please let me know or someone give me some advice on a better cam i have a 2000 1500 5.2L with stock internals got tranny work done and full 3" exhaust so im looking for a good power adder and i know about the tune with the cam im just looking to see whats the biggest cam i can get for my truck thanx
if anyone could tell me where i could find springs and push rods that will support this please let me know or someone give me some advice on a better cam i have a 2000 1500 5.2L with stock internals got tranny work done and full 3" exhaust so im looking for a good power adder and i know about the tune with the cam im just looking to see whats the biggest cam i can get for my truck thanx
Veteran
Joined: Jun 2008
Posts: 299
Likes: 0
From: nebraska
try this....http://www.bionicdodge.com/bionic/in...5&topic=9197.0. usually they say .50 inches of lift is max for the stock magnum heads