2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

need an engine!! v10

Thread Tools
 
Search this Thread
 
Old Apr 1, 2010 | 06:04 PM
  #1  
my name is v10, & my tank is empty's Avatar
my name is v10, & my tank is empty
Thread Starter
|
Registered User
Joined: Dec 2009
Posts: 8
Likes: 0
From: ct
Exclamation need an engine!! v10

hi, help!!1 i recently had a post about a problem i was having with my 99 ram v10, well problem is over the egine blew. : ( does anyone know where i could find a v10 longblock for under 2 thousand? or at least a decent used or rebuild engine for cheap?? would be very much apreciated! thank you very much.
 

Last edited by my name is v10, & my tank is empty; Apr 1, 2010 at 06:10 PM.
Reply
Old Apr 1, 2010 | 06:28 PM
  #2  
TruckinDodge's Avatar
TruckinDodge
Professional
Joined: Jan 2008
Posts: 155
Likes: 0
From: Billings MT
Default

Try this place there are some used engines near you.

http://car-part.com/index.htm
 
Reply
Old Apr 1, 2010 | 08:07 PM
  #3  
my name is v10, & my tank is empty's Avatar
my name is v10, & my tank is empty
Thread Starter
|
Registered User
Joined: Dec 2009
Posts: 8
Likes: 0
From: ct
Default

cool, thanks for that site, does anyone know of any others also? or a company, or shop/store that sells remanufactures / rebuilt or used running or complete engines? thanks again any and all help is very much apreciated like i said before, i just want to get my girl up and running again, or does anyone know of a real good rebuild kit that comes with pistons bearings and what not? also i dont know if my heads got damaged when it blew ith broke off my plug in one cylinder and i drove it home that way : ( what else should i look for? any advice? thanks again guys
 
Reply
Old Apr 1, 2010 | 10:40 PM
  #4  
MrRuckuss's Avatar
MrRuckuss
Veteran
Joined: Mar 2009
Posts: 298
Likes: 1
From: Indiana
Default

take it apart you should be able to see the extent of the damage...i.e. cylinder walls, you may have that offset chance that there was minimal damage, as far as rebuild kits good luckmay save you alot of money but heres a whole truck http://cincinnati.craigslist.org/pts/1670752310.html

buy the whole truck and sell what you don't need.
I haven't seen a rebuild kit for these engines...i'd call summit or jegs i'm sure somebody out there has one just the question is ....who
 
Reply
Old Apr 2, 2010 | 01:52 AM
  #5  
my name is v10, & my tank is empty's Avatar
my name is v10, & my tank is empty
Thread Starter
|
Registered User
Joined: Dec 2009
Posts: 8
Likes: 0
From: ct
Default

hey, thanks guys for all the help so far its has helped alot, does anyone know of a place that has reman long blocks or even turn keys? thanks !! : ) " mopar or no car" !
 
Reply
Old Apr 2, 2010 | 01:56 AM
  #6  
yakkier's Avatar
yakkier
Banned
Joined: May 2006
Posts: 3,667
Likes: 1
From: Burnsville, mn - Pensacola, fl
Default

thats gonna be an expensive paper weight. Goodluck keep us posted
 
Reply




All times are GMT -4. The time now is 10:30 PM.