2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

need vacuum line help

Thread Tools
 
Search this Thread
 
Old Aug 23, 2010 | 05:18 PM
  #1  
lifted3185spd's Avatar
lifted3185spd
Thread Starter
|
Registered User
Joined: Aug 2010
Posts: 1
Likes: 0
Default need vacuum line help

i have a 1994 ram 1500 318 5spd 5 inch suspension 3 inch body and the four vacuum lines that are on top of the transfercase caught the front driveshaft and ripped off of where they should be i know the red and black lines go to the 4wd switch but the is a green one and a gray one that i dont know where they go i think the gray one goes to the intake manifold but i could be wrong any help would be very apreciated.
 
Reply
Old Aug 23, 2010 | 08:00 PM
  #2  
eyedontneedaname's Avatar
eyedontneedaname
Registered User
Joined: May 2010
Posts: 22
Likes: 0
Default

yesur i redid all mine the other day. just went and bought like 6 feet of 1/8 gas line. and some vacuum tubing connectors

green is for the vent.
grey goes to the intake manifold.
red goes to the tall hard line.
and black goes to the short one.

i might have the black and red swapped in my head though.

i cannn tell you that the grey hose has to connect to the one off ball connector that has the 2 triangle on eather side. the vent is across from it. make sure you also connect the transfercase line upto the 2:1 connector..

i hope i didnt just type all this wrong and make myself look stupid
 
Reply




All times are GMT -4. The time now is 11:46 AM.