2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

318 to 360 swap

Thread Tools
 
Search this Thread
 
Old Aug 24, 2010 | 09:22 PM
  #1  
ramsport-99's Avatar
ramsport-99
Thread Starter
|
Rookie
Joined: Feb 2010
Posts: 78
Likes: 0
From: Vermont
Default 318 to 360 swap

Hi guys, I have recently been givin three good running 360mag engines out 96 and 97 rams. I have plans to build one of the engines and eventually drop it in my 99 to make a really fun truck. I have the 318 which has proven to me to be a good little engine, although no powerhouse on its own. Poor thing needs some help, runs 17.7sec. at 79.8mph in the quater mile the way mine is set up, but it works fine for daily driving and small towing. I was wondering if i could drop in one of the stock 360's and have it run ok with the stock 318 computer. I know u can with a chevy 305 - 350 swap, seems like the same type of thing.

Oh and I will post some drag strip videos next time i go up to the track, if i remeber the camera. I always think of it when im out on the trail or going down the track, never before I leave. Thats right, I drive my truck everyday, and trail ride with it in the woods, play in the sand and mud, and I race anything under the sun. I usually lose the race but its still fun.
 
Reply
Old Aug 24, 2010 | 09:25 PM
  #2  
97ramnj's Avatar
97ramnj
Captain
Joined: Dec 2008
Posts: 578
Likes: 0
From: New Jersey
Default

wana donate a 360 just block and heads to another dodge brother?! !
 
Reply




All times are GMT -4. The time now is 07:47 AM.