2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

help me out please

Thread Tools
 
Search this Thread
 
Old Sep 6, 2010 | 09:11 PM
  #1  
benm2717's Avatar
benm2717
Thread Starter
|
Registered User
Joined: Aug 2010
Posts: 15
Likes: 0
Default help me out please

i have a 97 dodge ram 1500 and i got 98 power and heated mirrors for it and i was wondering if anyone could tell me what wire and how i could hood the heated part up is what thank you
 

Last edited by benm2717; Sep 6, 2010 at 09:13 PM.
Reply
Old Sep 6, 2010 | 11:53 PM
  #2  
CPTAFW163's Avatar
CPTAFW163
Champion
Joined: Jun 2004
Posts: 2,811
Likes: 2
From: Ft Campbell, KY/TN
Default

considering that you do not have an "ON" switch in your dash to turn them on...there is no direct hookup.

Here is what you do:
1. Have a hot wire running to a 12V current and another wire for ground.
2. Hook both them up
3. Buy a fused switch, and put that inline with the 12V power.

VIOLA
 
Reply
Old Sep 7, 2010 | 01:24 AM
  #3  
Scottr1110's Avatar
Scottr1110
Veteran
Joined: Mar 2006
Posts: 342
Likes: 1
From: Westmont IL
Default

you could goto the junk yard and look around in cars that have a heated mirror switch that looks nice pull it out with the connector and then wire a switched 12v source with a fuse into it and run the mirrors to the switch and there ya go
 
Reply




All times are GMT -4. The time now is 05:12 AM.