tie rod bent?
#1
#7
Trending Topics
#8
#9
looks like we had some fun!!!
i think you're going to need a new tie rod from the junkyard. you got any in your area? if its a pull-your-own, you can practice on removing yours. probably need a pickle fork/big hammer or a 2 jaw puller or an idler arm puller to separate the joints.
you might could remove yours and heat it up and straighten it. but, i don't know that i'd bet my life on it for a street driven vehicle. offroad only would be ok, but not street.
i think you're going to need a new tie rod from the junkyard. you got any in your area? if its a pull-your-own, you can practice on removing yours. probably need a pickle fork/big hammer or a 2 jaw puller or an idler arm puller to separate the joints.
you might could remove yours and heat it up and straighten it. but, i don't know that i'd bet my life on it for a street driven vehicle. offroad only would be ok, but not street.
#10