I need some info I bought a2001 1500 4x4 it was hit in front wheel which bent the axle mounts.my question is what year housing will fit or can the weld on mounts be purchased somewhere.I cant get any salvage yards to mess with them.or if some has a housing that will fit let me know.thanks

 

Welcome to the site. I will move this thread to the second generation Ram section,
FF

 

Odds are, if the mounts are bent, there is a good chance the axle tube(s) are also bent. I would replace the whole thing. 2000 to 2001 are the years I would stick with as the knuckles may be different, but you could swap yours over. Like I said though. Other parts may be bent and I wouldn't chance using anything off the old one.