No start problem........
#1
10-03-2010, 01:08 PM
Join Date: Nov 2007
Location: Laval,Quebec,Canada
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
No start problem........
hey guys....
My 94 2500 5.9 gas 4X4 will just turn over but wont start.Replaced coil, wires and plugs...
codes are 54 and 37. 37 is most likely a lean or rich running condition, and 54 is camshaft position sensor. I called Dodge and they say my truck DOES NOT have one.Is that true?? What could it be?? CKPS??
I put a little gas in the TB and still no sputter, just cranks...
Any ideas??
Thanx!!
My 94 2500 5.9 gas 4X4 will just turn over but wont start.Replaced coil, wires and plugs...
codes are 54 and 37. 37 is most likely a lean or rich running condition, and 54 is camshaft position sensor. I called Dodge and they say my truck DOES NOT have one.Is that true?? What could it be?? CKPS??
I put a little gas in the TB and still no sputter, just cranks...
Any ideas??
Thanx!!
#2
10-03-2010, 02:26 PM
it does have a cam position sensor, but parts stores list it as secondary ignition coil or distributor pickup.
http://shop.advanceautoparts.com/webapp/wcs/stores/servlet/product_Distributor-Pickup-Assembly-BWD_18240270-P_200_R|GRPTUNEAMS_673776139___
http://shop.advanceautoparts.com/webapp/wcs/stores/servlet/product_Distributor-Pickup-Assembly-BWD_18240270-P_200_R|GRPTUNEAMS_673776139___
#3
10-03-2010, 03:07 PM
Join Date: Nov 2007
Location: Laval,Quebec,Canada
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts