4x4 Light Wont Turn On
Professional
Joined: Oct 2005
Posts: 185
Likes: 1
From: Las Vegas, NV
I've seen a few others talking about this, if you are sure the 4x4 is properly engaging then either the light is burned out in the dash, or the switch on the cad that controls the dash light is failed
Professional
Joined: Jun 2008
Posts: 136
Likes: 0
From: Virginia Beach, VA
the light only comes on if the front axle engauges. If this does not happen the light will not come on. Check the vacuum hoses going to the cad. They run to the t case along the pass side frame rail.
