3/4 ton d70 drum to disk
Captain
Joined: Oct 2009
Posts: 730
Likes: 10
From: Near Charlotte, NC
maybe some 2000's year too.
I think a trip to junkyard is in order or call Mintons
Thread Starter
|
Rookie
Joined: Jan 2011
Posts: 57
Likes: 0
yeah i saw that blackbird kit but you cant get it done cheaper
i just went ahead and did the 1 ton wheel cylinder upgrade and turned out my rotors werent bad there is just a very minimal difference between brand new and replacement
measured with a caliper and i was within specs still
also found out that the shoes came with all 4 pads i thought it was only per side
so i ended up only spending about $80 with the 1 tons , new shoes and hardware kit
i just went ahead and did the 1 ton wheel cylinder upgrade and turned out my rotors werent bad there is just a very minimal difference between brand new and replacement
measured with a caliper and i was within specs still
also found out that the shoes came with all 4 pads i thought it was only per side
so i ended up only spending about $80 with the 1 tons , new shoes and hardware kit