I'm searching for a used Kegger to mod and install but I don't know what hole they are referring to for the EGR. I don't have access to check my truck but the ones I am looking at on ebaymotors have pictures. I just want to make sure I get the correct one.

Thanks.

 

Not quite sure what question you're trying to get across, but I think you're asking if your truck has egr or not, the answer to which is: yes. If I recall correctly, dodge did away with egr in 96 when obdII was implemented, so your 94 should have one.

I apologize if this was not your question, but I don't really understand what it is you're asking exactly.

 

Sorry for the lack of clarity on my initial post.

I know my truck has EGR but I have read various posts about kegger mod and plenum replacement. I plan to do these mods and am looking to just buy a second manifold to work on in my spare time. Since I am probably going to buy one from a junkyard or ebaymotors I want to make sure I get the exact one I need.

How can I identify whether a manifold is EGR compatible by just looking at it?

 

94-97ish has the EGR port on the intake, although it can be blocked off and eliminated with just a small steel plate and gasket.

this one has the EGR port. it in the top right hand corner of the picture, which is the right side rear of the intake (passenger side).
http://cgi.ebay.com/ebaymotors/1993-...Q5fAccessories

here's an older 90 model, with EGR blocked off.
http://cgi.ebay.com/ebaymotors/DODGE...Q5fAccessories


this one has no EGR 98+
http://cgi.ebay.com/ebaymotors/98-99...Q5fAccessories

 

Guys, thanks for the info! That sort of thing is why this forum is so great.