When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
I found it easier to take on and off if you zip tie the two wiring looms up to the main harness, gives you some more clearance. Taking the cowl weather stripping/hood seal off during installation also give you more room.
Also, are you sure you are installing the 14x3 correctly? You need to put the filter in the base of the air cleaner, then place the base with the filter in it, on the throttle body. Then screw in the S-Bolt, then put the air cleaner top on and tighten it down.
i had the 10x3 and the K&N cai and now the mopar round . the bigger round is def by far the best one. 10x3 was too small didnt bring in enough air for my truck.