2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Drl

Thread Tools
 
Search this Thread
 
Old Apr 29, 2011 | 08:13 PM
  #1  
lifesavin's Avatar
lifesavin
Thread Starter
|
Registered User
Joined: May 2008
Posts: 24
Likes: 0
From: Seattle, WA
Default Drl

I just put in this HID Conversion kit.

http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWNX%3AIT

Does anybody know if there is a way to disable the daytime running lights? I really don't want my lights on now if I don't really need them.

I looked around here but didn't seem to find anything for my vehicle.
 
Reply
Old Apr 29, 2011 | 08:49 PM
  #2  
Ram_King's Avatar
Ram_King
Professional
Joined: May 2008
Posts: 210
Likes: 0
From: Aurora, Ohio
Default

might be able to just pull a fuse in the fuse box. check the owners manual.
 
Reply
Old May 2, 2011 | 12:23 AM
  #3  
lifesavin's Avatar
lifesavin
Thread Starter
|
Registered User
Joined: May 2008
Posts: 24
Likes: 0
From: Seattle, WA
Default

I will check for a fuse. Hopefully I can get them to shut off.
 
Reply
Old May 2, 2011 | 02:20 AM
  #4  
jasonw's Avatar
jasonw
Site Moderator
Joined: Jan 2008
Posts: 8,374
Likes: 28
From: Sioux Falls, SD
Default

May be a relay rather than a fuse. Both/either are in the Power Center box under the hood if you have it/them.
 
Reply
Old May 3, 2011 | 07:35 AM
  #5  
Diefenbaker's Avatar
Diefenbaker
Rookie
Joined: Feb 2006
Posts: 54
Likes: 0
From: Berlin/Germany
Default

There is a small black box mounted to the drivers side inner fender. Disconnect the plug and DRL will no longer work. The only problem you will now have is a non working high beam indicator.
You can repair this by bypassing pin 3 (red/gray) and pin 6 (red/orange).
 
Reply




All times are GMT -4. The time now is 08:58 PM.