DodgeForum.com

2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Loosening lug nuts

Thread Tools
 
Search this Thread
 
Old Nov 7, 2011 | 08:13 PM
Share
  #11  
J415's Avatar
J415
Champion
Joined: Feb 2009
Posts: 3,416
Likes: 4
From: Bay Area, CA
Default
Originally Posted by BackwoodsRam
trust me i had a wheel come off friday night on a very narrow very tall bridge due this same thing...needless to say it was a very bad night and it ruined my weekend.
Hu? Trust what?
 
Reply
0
Old Nov 7, 2011 | 08:23 PM
Share
  #12  
stewie01's Avatar
stewie01
Legend
Joined: Mar 2011
Posts: 8,914
Likes: 4
From: Fredericksburg, Virginia
Default
Probably trust that he needs to check the rest of the wheels and lugs/lug nuts and get the stripped lugs/lug nuts fixed before he ends up with a tire flyin' off


I had a close call with one almost coming off myself. And I've had an upper control arm break while driving to work, which isn't fun either.
 
Reply
0
Old Nov 7, 2011 | 08:48 PM
Share
  #13  
shorty24v's Avatar
shorty24v
Thread Starter
|
Captain
Joined: Oct 2010
Posts: 580
Likes: 1
From: CT
Default
Originally Posted by stewie01
Have you checked the rest of the lugs/lug nuts on the other wheels?
I went around and everything else was tight.
 
Reply
0
Old Nov 8, 2011 | 05:04 AM
Share
  #14  
stewie01's Avatar
stewie01
Legend
Joined: Mar 2011
Posts: 8,914
Likes: 4
From: Fredericksburg, Virginia
Default
Good. Just get the bad one's fixed.
 
Last edited by stewie01; Nov 8, 2011 at 06:58 PM. Reason: Grammar
Reply
0
Old Nov 8, 2011 | 06:51 PM
Share
  #15  
Aubrey's Avatar
Aubrey
Record Breaker
Joined: Dec 2006
Posts: 1,366
Likes: 1
From: Englewood, CO
Default
You have Paul Stanley wheels. Awesome.
 
Reply
0
Old Nov 8, 2011 | 06:57 PM
Share
  #16  
stewie01's Avatar
stewie01
Legend
Joined: Mar 2011
Posts: 8,914
Likes: 4
From: Fredericksburg, Virginia
Default
Originally Posted by Aubrey
You have Paul Stanley wheels. Awesome.
Apparently that's over my head.???
 
Reply
0
Old Nov 8, 2011 | 07:03 PM
Share
  #17  
zman17's Avatar
zman17
Retired Moderator - RIP
Joined: May 2008
Posts: 18,729
Likes: 17
From: NH
Default
Originally Posted by Aubrey
You have Paul Stanley wheels. Awesome.
hahahaha!
 
Reply
0
Old Nov 8, 2011 | 07:06 PM
Share
  #18  
stewie01's Avatar
stewie01
Legend
Joined: Mar 2011
Posts: 8,914
Likes: 4
From: Fredericksburg, Virginia
Default
Originally Posted by zman17
hahahaha!
Care to explain? I'm feelin way out in left field on this
 
Reply
0
Back to Subforum
2nd Gen Ram Tech
View Next Unread
High gear shifting/Cruise Control problem




Advanced Search
Reply Closed Thread Share
Forum Jump

All times are GMT -4. The time now is 10:51 PM.