DodgeForum.com

DodgeForum.com (https://dodgeforum.com/forum/)
-   2nd Gen Ram Tech (https://dodgeforum.com/forum/2nd-gen-ram-tech-64/)
-   -   I need help!!!!!!! (https://dodgeforum.com/forum/2nd-gen-ram-tech/319070-i-need-help.html)

Dodgeman512 02-23-2012 02:36 PM

I need help!!!!!!!
 
i have a 95 dodge ram 1500 5.2 v8. i bought it for $2700 and half way home i noticed the oil light came on and i had 0 oil psi i changed the oil and filter and also the sending unit the light stopped coming on and i had good oil psi for about a week then the light came on and i lost psi any ideas?

mantisman51 02-23-2012 04:58 PM

You should post this in the 2nd Generation Ram section. There's guys there that can help. But I'd think 1) Worn main bearings 2) Bad oil pump.

lghtngblt02 02-24-2012 09:00 AM

Moved!

Good luck! I would guess the same as Mantis did. Did start knocking and tapping when the light came on?

jam23 02-24-2012 02:57 PM

bad main bearing and major engine problems usually wouldn't make oil psi intermittent. What I would do Is drop your oil pan and take a look at you pick up screen. The screen could be sludged as well as the tube. While your under there you might as well put a pump in though with a new pick up tube and screen and oil pan gasket. This maintenance is well worth your time and money.

dhvaughan 02-24-2012 03:38 PM

put in a melling high volume pump with clean or new pickup and you'll probably be fine.

if your rear mail seal is leaking replace it too.
http://www.pavementsucks.com/tech-article-31.html


All times are GMT -4. The time now is 06:14 AM.


© 2024 MH Sub I, LLC dba Internet Brands