Need help...I have 97 Ram 2500, 360 Auto 4x4 that runs great but the last week or so I'm getting an intermitent check engine light and a dead miss at all speeds. Feels just a like a bad plug or wire but all are fine. If I pull the negative cable for a couple minutes the code will clear and the truck runs perfect again until the light comes back. Any suggestions?
Thanks in advance!

 

Have the next code read at the autoparts store and go from there..

 

IF YOU HAVE A MISS AT IDLE YOU CAN PULL ONE WIRE AT TIME TO SEE WHAT CYLINDER IS MISSING. 96 AND UP SHOULD TELL YOU WHAT CYLINDER HAS A MISFIRE
FROM YOUR OBD CONNECTOR. LET ME KNOW WHT U FIND FROM HERE.

 

thanks all I am waiting for the next check engine light and I will head back to autozone to have it read.
Dave