DodgeForum.com

2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Help replacing front right universals/drive shaft.

Thread Tools
 
Search this Thread
 
Old Jul 18, 2012 | 07:20 PM
Share
  #11  
ZeroZero3's Avatar
ZeroZero3
Professional
Joined: Feb 2012
Posts: 166
Likes: 0
From: Canada East Coast
Default
Originally Posted by zman17
LOL. Round off the heads using the wrong size and good luck. Those bolts are on with like a 150 ft pounds.
Didn't happened to me.
 
Reply
0
Old Jul 18, 2012 | 07:25 PM
Share
  #12  
Darren270's Avatar
Darren270
Rookie
Joined: Apr 2012
Posts: 95
Likes: 0
From: Colorado
Default
If you can get that wheel bearing off without it being destroyed it will be a miracle....
A $20 bearing puller from Harbor Freight and I had mine off in less than 30 secs with no damage.
 
Reply
0
Old Jul 18, 2012 | 07:39 PM
Share
  #13  
dlyter09's Avatar
dlyter09
Champion
Joined: Apr 2011
Posts: 3,574
Likes: 0
From: Harrisburg,PA
Default
Well around here its about impossible to do without damage
 
Reply
0
Old Jul 18, 2012 | 07:57 PM
Share
  #14  
ZeroZero3's Avatar
ZeroZero3
Professional
Joined: Feb 2012
Posts: 166
Likes: 0
From: Canada East Coast
Default
Just back out the bearing assy bolt a bit keep your favorite socket on the bolt and hit with a hammer, work it like that until you push it out. The right way is using a zip gun with an adapter to hit the bolt the same way.

By the way 9/16 is 14.29mm, so basically a **** hair more lol.
 
Reply
0
Back to Subforum
2nd Gen Ram Tech
View Next Unread
Bench Seat Stuck Down




Advanced Search
Reply Closed Thread Share
Forum Jump

All times are GMT -4. The time now is 12:03 AM.