When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
Hey guys, I'm new to this forum and I'm looking for answers that no one else can seem to give me, anyways I have a 99 dodge ram 360/5.9 and I recently did a 208/214 cam swap. The truck runs great with the cam but it keeps breaking the #7 cylinder intake rocker arm bolt. I've tried swapping a different head,changing rocker arms around and I just recently tried #8 forged bolts but it's snapped them off 3 times. Any suggestions on what I should do?
Thanks for the swift response, I'm pretty sure it's not the push rod because every time it broke a bolt it would bend the pushrod so I had to change it too, a bad lifter is very possible, I guess I'll pull the intake back off and take a look at it. Thanks guys.