DodgeForum.com

DodgeForum.com (https://dodgeforum.com/forum/)
-   2nd Gen Ram Tech (https://dodgeforum.com/forum/2nd-gen-ram-tech-64/)
-   -   No Bus, Brake Light (https://dodgeforum.com/forum/2nd-gen-ram-tech/362993-no-bus-brake-light.html)

ShelbyGT550 09-17-2013 08:23 PM

No Bus, Brake Light
 
About every couple days sometimes more the cluster will go out and flash "no bus" Replaced the speed sensor and I have verified its not the speed sensor as cruise stays on and maintains speed while the dash does its "no bus" thing, Its starting to get annoying as its not recording my mileage while its doing this. Another issue is that the brake light is on all the time, I have checked the parking brake, Replaced all the brakes all around, Front calipers as well, And it still won't go out, Fluid is at max. I have looked all over the forum with no info to my problems, Thanks in advance,

Its a 1999 Dodge Ram 1500 5.2, 4X4, Auto,

ShelbyGT550 09-17-2013 08:36 PM

Also forgot to mention, A couple days ago, While accelerating I had the "check engine" light come on and flash at me until I got my foot out of the gas, Any ideas?

HeyYou 09-18-2013 11:33 AM

CEL flashing is indicating an engine miss. Fixed your plenum yet?

No bus may simply be a bad connection to the cluster. Do any of your gauges quit working when it comes up?

ShelbyGT550 09-18-2013 12:11 PM

Have not replaced the plenum yet. First the spedo goes. Then the tach. Then the rest go

Johnn123 09-18-2013 01:29 PM

Open up the pdc box, and tighten the big screw at the top towards the motor down. When it gets tightened down as far it will go it will feel like its stripping but its not, just prevents it from over-tightening. Doing this, and cleaning my grounds up solved the no-bus issue when I got it.

zman17 09-18-2013 05:06 PM


Originally Posted by ShelbyGT550 (Post 3077088)
Have not replaced the plenum yet. First the spedo goes. Then the tach. Then the rest go

Multiple misfires most likely means cat is clogged or clogging. Fix the plenum before you have a cracked head or 2. The other problem is secondary as far as cost in the long run.

ShelbyGT550 09-18-2013 08:38 PM

Ok, I'll take a peak at the plug on cyl 8 and look down the intake to see what I see, I'll also tighten that bolt that was suggested. But what about my brake light? Any ideas on it,

HeyYou 09-18-2013 08:46 PM

Could be related to the cluster fark. (sorry, couldn't resist) When you lose speedo, ABS gets confused.

ShelbyGT550 09-19-2013 09:11 PM

3 Attachment(s)
Here is what I see when I look down the intake

https://lh3.googleusercontent.com/-p...919_200258.jpg

https://lh3.googleusercontent.com/-x...919_200255.jpg

https://dodgeforum.com/forum/attachm...ine=1379639483

And Cly 8 Plug

https://dodgeforum.com/forum/attachm...ine=1379639483

https://dodgeforum.com/forum/attachm...ine=1379639483

ShelbyGT550 09-19-2013 09:12 PM

Also cleaned and replaced a bunch of the grounds, and the connections in the PDC, Time will tell if it fixes that problem, Brake light is still on tho.


All times are GMT -4. The time now is 09:22 PM.


© 2024 MH Sub I, LLC dba Internet Brands