2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Got transmission pulled just a quick answer

Thread Tools
 
Search this Thread
 
Old Jul 9, 2014 | 12:03 AM
  #1  
zach01's Avatar
zach01
Thread Starter
|
Professional
Joined: Mar 2013
Posts: 150
Likes: 0
Default Got transmission pulled just a quick answer

Pulled the tranny out of my dodge last night in the driveway only took 3 hours and 8 beers

So I'm replacing the front pump....

Can someone help me with a yes or no or advice answer

To remove the front pump on the 46re transmission do I just unbolt the 7 bolts and then use 2 slide hammers to pull it.... And that's it?? I just don't want to mess up anything


Thanks in advance
 
Reply
Old Jul 9, 2014 | 08:15 AM
  #2  
redneck_ram's Avatar
redneck_ram
Champion
Joined: Nov 2009
Posts: 4,081
Likes: 1
From: Rochester, NH
Default

why dont you just rebuild the whole thing. theres a reason it failed. im sure the rest of the trans isnt too far behind...
 
Reply
Old Jul 9, 2014 | 07:59 PM
  #3  
zach01's Avatar
zach01
Thread Starter
|
Professional
Joined: Mar 2013
Posts: 150
Likes: 0
Default

Trans pump didn't fail just the seals but since tranny is it out I'm replacing pump for the hell of it. MY tranny is only 2 years old doesn't need a rebuikd
 
Reply
Old Jul 9, 2014 | 08:26 PM
  #4  
xjarhead69's Avatar
xjarhead69
Record Breaker
15 Year Member
Joined: Nov 2009
Posts: 1,044
Likes: 0
From: Leesburg, IN
Default

Originally Posted by zach01
Pulled the tranny out of my dodge last night in the driveway only took 3 hours and 8 beers

So I'm replacing the front pump....

Can someone help me with a yes or no or advice answer

To remove the front pump on the 46re transmission do I just unbolt the 7 bolts and then use 2 slide hammers to pull it.... And that's it?? I just don't want to mess up anything


Thanks in advance
Yes

Dave
 
Reply
Old Jul 9, 2014 | 08:39 PM
  #5  
zach01's Avatar
zach01
Thread Starter
|
Professional
Joined: Mar 2013
Posts: 150
Likes: 0
Default

Thams David I'm going to go out and so it now thank you will update once it's pulled
 
Reply
Old Jul 12, 2014 | 01:35 AM
  #6  
zach01's Avatar
zach01
Thread Starter
|
Professional
Joined: Mar 2013
Posts: 150
Likes: 0
Default

Got the pump pulled new in and the tranny back in the truck ran out of day light. Got a coule hours left tomorrow just got hook up linkage and add fluid and hook up the exhuast
 
Reply




All times are GMT -4. The time now is 08:55 PM.