300,000 + miles and I finally need help
Thread Starter
|
Registered User
Joined: Dec 2014
Posts: 3
Likes: 0
300,000 + miles and I finally need help
I have a 98 1500 two wheel drive and my tranmission finally's going out. I'm not made of money so I want to make sure I get this right I'm needing to know what transmission I have. ThIs is the # I came up with PK52119514aa-1149-7135. I'm looking at just getting a used one but I want to make sure in getting the right one and I'm also wondering if I should get a new torque converter for it and if so is there anything I need to know for that. Thanks for UR your help
Record Breaker
Joined: Nov 2009
Posts: 1,044
Likes: 0
From: Leesburg, IN
Call the dealer parts department and get build sheet for your truck, their free. It will tell you what you need to know.
As far as convert goes MonteC the resident tranny gooroo on here recommends precision of new hampton converter.http://api.viglink.com/api/click?for...w.gopnh.com%2F Also read thru his thread so you have idea of what to get in a rebuild or to add to your used one to prolong the life of it, being used and all.
https://dodgeforum.com/forum/2nd-gen...info-only.html
Dave
As far as convert goes MonteC the resident tranny gooroo on here recommends precision of new hampton converter.http://api.viglink.com/api/click?for...w.gopnh.com%2F Also read thru his thread so you have idea of what to get in a rebuild or to add to your used one to prolong the life of it, being used and all.
https://dodgeforum.com/forum/2nd-gen...info-only.html
Dave
Last edited by xjarhead69; Dec 26, 2014 at 07:39 PM.
There's a link around here to get your build sheet via email. As far as the transmission goes, I'd take it to a reputable place and have it inspected. Could be something simple but a pt 300k, I would suspect it's rebuild time. They can rebuild the existing torque converter.