2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

all kinds of issues

Thread Tools
 
Search this Thread
 
Old Oct 14, 2016 | 03:20 PM
  #1  
byronpen's Avatar
byronpen
Thread Starter
|
Veteran
Joined: Oct 2010
Posts: 321
Likes: 0
From: Adrian MI
Default all kinds of issues

I have White smoke coming form my crank case breather.
Plenum has been done about 2 years ago. I dont Drive this truck much
1500 miles a year maybe

I have oil all over the place on the very front lower part of my motor

My shifting is not right . I have to give it gas and let of real quick and it gos into gear.

Transmission 4 years old maybe 4000 miles on it.

My truck will not go above 60 mph

I just noticed that my evac system is falling apart . Dose this need to be fixed. it had to be this way when I bought it from a old buddy. I think he bought the truck out of a el paso junk yard. As in the motor. motor has the classic junk yard yellow pen marker that says 60000 miles on the side of the block.


Well Lets have some fun. I Need the groups help. Please if you dont know what you are talking about , Just pass on my post.
 
Reply
Old Oct 15, 2016 | 09:40 AM
  #2  
Moparite's Avatar
Moparite
Grand Champion
Loved
Community Favorite
10 Year Member
Community Builder
Joined: Feb 2015
Posts: 7,435
Likes: 578
Default

Multiple post!

https://dodgeforum.com/forum/2nd-gen...-breather.html

You may want to check if the pvc valve is working/hooked up. How many miles on the motor? You have multiple issues, More info such as codes you have could be helpful. What part of the evap system is falling apart? Pics?
 
Reply
Old Oct 17, 2016 | 11:17 AM
  #3  
jkeaton's Avatar
jkeaton
DF Admin
15 Year Member
Photogenic
Photoriffic
Liked
Joined: Apr 2010
Posts: 28,204
Likes: 363
From: Winston Salem, NC
Default

Originally Posted by Moparite
Multiple post!

https://dodgeforum.com/forum/2nd-gen...-breather.html

You may want to check if the pvc valve is working/hooked up. How many miles on the motor? You have multiple issues, More info such as codes you have could be helpful. What part of the evap system is falling apart? Pics?
Deleted duplicate post.
 
Reply




All times are GMT -4. The time now is 06:36 AM.