2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Rocker Arm Torque?

Reply Subscribe

Search this Thread

#1

Old

07-31-2020, 11:13 PM

i4ni

i4ni is offline

Amateur

Thread Starter

Join Date: Apr 2020

Posts: 29

Likes: 0

Received 0 Likes on 0 Posts

Default

Rocker Arm Torque?

I removed the stock rocker arms on the # 2 cyl. on a 5.9 V8 to check cam lift off the push rods. I assume each rocker arm should be re-torqued on the round part of the cam as there is no other way to adjust lash that I can see. Am I missing anything?

Reply Like

#2

Old

08-01-2020, 01:27 AM

DerTruck

DerTruck is offline

All Star

Join Date: Dec 2018

Posts: 920

Received 103 Likes on 98 Posts

Default

From the FSM: (3) Install rocker arm and pivot assemblies in the same order as removed. Tighten the rocker arm bolts to 28 N·m (21 ft. lbs.) torque.

Reply Like

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last

All times are GMT -4. The time now is 07:48 PM.