2nd Gen 47RE trans fluid level mark setting
Thread Starter
|
Registered User
Joined: May 2021
Posts: 1
Likes: 0
From: MN
2nd Gen 47RE trans fluid level mark setting
I have a 1999 Ram 3500 47RE V10 2WD.
I think it has the wrong trans dipstick.
With the pan off and the dipstick fully inserted, should the full mark be straight across from the pan gasket case mating surface?
Any response is greatly appreciated.
Thanks
I think it has the wrong trans dipstick.
With the pan off and the dipstick fully inserted, should the full mark be straight across from the pan gasket case mating surface?
Any response is greatly appreciated.
Thanks