Oil consumption
Record Breaker
Joined: Jun 2011
Posts: 2,387
Likes: 41
From: Bismarck, ND
Nothing was pinched when you set the intake down was it? The gaskets were lined up? I don't recall if the v8 gaskets have the plastic alignment peg molded into them, the v10s do and if they aren't seated they get pinched and it causes a vacuum leak at that cylinder into the cam valley and that will cause a misfire and pull in oil.
Thread Starter
|
Professional
Joined: Mar 2017
Posts: 142
Likes: 1
Nothing was pinched when you set the intake down was it? The gaskets were lined up? I don't recall if the v8 gaskets have the plastic alignment peg molded into them, the v10s do and if they aren't seated they get pinched and it causes a vacuum leak at that cylinder into the cam valley and that will cause a misfire and pull in oil.
worst case scenario , this must have occured. But while placing the manifold back, we didn't have any issues..
If i don't find it tomorrow, guess i'll order a new gasket set and redo it , just to be sure 😂🫠