2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

will i have to get a longer driveshaft for this setup

Thread Tools
 
Search this Thread
 
Old Apr 12, 2006 | 07:25 PM
  #1  
dirty dog's Avatar
dirty dog
Thread Starter
|
Professional
Joined: Apr 2006
Posts: 197
Likes: 0
From:
Default will i have to get a longer driveshaft for this setup

ok i got a 5" suspension and 3" body right now with the rear blocks in my suspension a 3" and a 2" block i wanna take the front coils out and put the skyjacker 7" coils in and take the 4" skyjacker softride leaf pack and put that on with the 3" blocks back in will i have to change anything else? im mainly worried bout the driveshaft? please feed me some info guys



thanx
 
Reply
Old Apr 12, 2006 | 08:07 PM
  #2  
GOD RAM IT's Avatar
GOD RAM IT
Record Breaker
Joined: Mar 2006
Posts: 1,759
Likes: 0
From: in the woods NY
Default RE: will i have to get a longer driveshaft for this setup

First off DONT STACK BLOCKS!!!!!!!!!!!! Danger

the front drive shaft will need a slip yoke and some cross member trimming.

Go to Sky jackers site and download the 7" kit install instructions for your truck and it will tell you everything you'll need to do.
 
Reply
Old Apr 13, 2006 | 12:21 PM
  #3  
dirty dog's Avatar
dirty dog
Thread Starter
|
Professional
Joined: Apr 2006
Posts: 197
Likes: 0
From:
Default RE: will i have to get a longer driveshaft for this setup

what i was saying is that when i got the truck the blocks were stacked thats how the 5" kit from rough country comes and i was going to get a leaf pack and keep the three inch block under there to get to more inches
 
Reply




All times are GMT -4. The time now is 12:56 PM.