2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

oil pressure sendin unit

Old Jul 21, 2006 | 02:17 AM
  #1  
mossy765's Avatar
mossy765
Thread Starter
|
Professional
Joined: Sep 2005
Posts: 167
Likes: 0
From:
Default oil pressure sendin unit

ive got a 1999 ram 2500 and i need to know where the oil pressure sendin unit is
 
Reply
Old Jul 21, 2006 | 03:53 AM
  #2  
dodgerules86's Avatar
dodgerules86
Champion
Joined: Dec 2003
Posts: 4,119
Likes: 5
From: Sycamore, Illinois (displaced to Arkansas)
Default RE: oil pressure sendin unit

If you have the V8, its to the engines right of the distributor.
V10 - Right by the engine oil filter
I6 - right below the engine cotrol module connector (at least thats where it is on the 2001's)
 
Reply
Old Jul 25, 2006 | 02:16 AM
  #3  
mossy765's Avatar
mossy765
Thread Starter
|
Professional
Joined: Sep 2005
Posts: 167
Likes: 0
From:
Default RE: oil pressure sendin unit

whats it look like
 
Reply
Old Jul 25, 2006 | 04:02 AM
  #4  
tireman_steve's Avatar
tireman_steve
Rookie
Joined: May 2006
Posts: 54
Likes: 0
From:
Default RE: oil pressure sendin unit

its very small maybe only 2 inches long, if you climb up into the truck and in the back right of the distributer down a little it looks like a small round cylinder kinda like a minature fuel filter it screws right in and has a wire connecter (ps look very carfully it can be kinda hard to see, well in my 5.2 it was at least)
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 07:34 AM.