Which Aftermarket 9.25" Limited Slip is ABS-compatible?
#1
07-28-2006, 04:59 PM
Join Date: Jul 2006
Location:
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Which Aftermarket 9.25" Limited Slip is ABS-compatible?
I'm looking for an aftermarket 9.25" posi that is ABS-ring compatible.
Staying away from the factory Trac-Lok (too many horror stories).
I was set on the Auburn but found this info:
===========================
Rearend: Chrysler 9.25" 12 Bolt
Spline Count: 31
Fits Ratios: 2.76-4.88
Auburn Gear Part #542071
(This posi unit is not ABS Ring compatible!)
===========================
I want a posi unit but don't want to lose the ABS.
Is there anything available (cone or clutch posi only) which is
ABS-ring compatible? Thanks.
Staying away from the factory Trac-Lok (too many horror stories).
I was set on the Auburn but found this info:
===========================
Rearend: Chrysler 9.25" 12 Bolt
Spline Count: 31
Fits Ratios: 2.76-4.88
Auburn Gear Part #542071
(This posi unit is not ABS Ring compatible!)
===========================
I want a posi unit but don't want to lose the ABS.
Is there anything available (cone or clutch posi only) which is
ABS-ring compatible? Thanks.
#2
07-28-2006, 07:42 PM
Record Breaker
Join Date: May 2005
Location: Wisconsin
Posts: 2,415
Likes: 0
Received 0 Likes
on
0 Posts
RE: Which Aftermarket 9.25" Limited Slip is ABS-compatible?
The Auburn unit will accept the ABS tone ring according to this site: http://www.nationaldrivetrain.com/sh...tml/page7.html
#3
07-28-2006, 08:13 PM
Grand Champion
#4
07-28-2006, 08:39 PM
Join Date: Jul 2006
Location:
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
RE: Which Aftermarket 9.25" Limited Slip is ABS-compatible?
OK, it's clear NOW. There are 2 units available for the 9.25".
The correct one for ABS is #542070:
Auburn Gear High Performance Series Chrysler 9.25" 31 Spl. 1984- Present
$389.95
542070
Auburn High Performance Series Chrysler 9.25" 31 Spl. 1984- Present NOTE: THIS UNIT WILL ACCEPT THE ABS TONE RING.
[Add to Cart] [View Cart]
Auburn Gear High Performance Series Chrysler 9.25" 31 Spl. 1968-83
$389.95
542071
Auburn Gear High Performance Series Chrysler 9.25" 31 Spl. 1968-83
[Add to Cart] [View Cart]
The correct one for ABS is #542070:
Auburn Gear High Performance Series Chrysler 9.25" 31 Spl. 1984- Present
$389.95
542070
Auburn High Performance Series Chrysler 9.25" 31 Spl. 1984- Present NOTE: THIS UNIT WILL ACCEPT THE ABS TONE RING.
[Add to Cart] [View Cart]
Auburn Gear High Performance Series Chrysler 9.25" 31 Spl. 1968-83
$389.95
542071
Auburn Gear High Performance Series Chrysler 9.25" 31 Spl. 1968-83
[Add to Cart] [View Cart]
#6
07-29-2006, 11:55 AM
RE: Which Aftermarket 9.25" Limited Slip is ABS-compatible?
My Detroit case locker is machined for a tone ring, have you looked at any of these?
http://www.detroitlocker.com/DL.htm
http://www.detroitlocker.com/DL.htm
#7
08-03-2006, 06:16 PM
Join Date: Jul 2006
Location:
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
