Rebuilding a 360
#2
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
Ya go to northernautoparts.com or call them 1-800-831-0884 I got a kit from them about 2 months ago for a 95 360 motor. Best prices and service period. Things to look for when you take it apart, when you get the cam thrust plate off, look for oil galley plugs in the lifter holes some have them, some don't dont. Mine did. Mark the rods 1-8 so you know where they go. On a dodge they go in the order of the crank. Stamp them towards the outside on each side and make sure you put them back in the same way. Other than that, pretty much just your run of the mill small block. And get new head bolts, it's cheap insurance.